This article explains how to fix the “Target account name is incorrect” error you are getting on your domain controllers. This usually stems from a system administrator doing a snapshot revert on the Domain Controller which messes up the KDC service and domain replication. It also can happen if you had a DC offline for a long time 30+ days.
Running the following commands will fix the XenCenter Error. You are typically encountering this error because Windows 10 requires stronger encryption, consequently, this is prevalent on older XenServer installations. I encountered this on XenServer 6.0.
This article teaches you how to prevent autodiscover from happening on Exchange Server. This is important on an Office 365 migration when you still need to keep your local exchange server from resolving.
This post goes over how to grant full access to all public folders for a user in Microsoft Exchange. I recently was migrating all public folders from an Exchange 2010 to Office 365 Environment and didn’t have access to some of the folders. Consequently, this solution saved me a lot of time from doing it through a GUI.
These steps will show you how to connect to the encore bandit devices. I recently configured both a bandit II and a bandit III device for using a VPN over satellite. The devices are configured through a 9-pin serial port they call the “Supervisory Port”. I use a basic serial to USB adapter and putty to connect. All the white papers for this device are good, but the setup and login are not as clear as you would think, that said, below are the following steps I used to connect.
This guide goes over how to Move Website from Linux to IIS. If you’re in the tech field, you probably see moving from Linux to IIS on a WordPress platform and immediately cringed.
If you are getting errors on a WordPress update that say you need FTP credentials, your apache install doesn’t have rights to do the changes. You could install vsftpd, but it is MUCH easier to just grant apache access to your WordPress.
If you run into SFC scannow error which cannot be repaired chances are you have some corrupt system components. The fastest way to fix this is by following these steps to repair your system.
I recently had a server freeze up when I wasn’t on-site and needed to power cycle it. I had configured iDrac before but it was not responsive. Here are some useful commands that can configure, reboot, and reset the iDrac function on Dell Servers. The commands below are run from a command prompt on the server (unless otherwise stated) in the (C:\Program Files\Dell\SysMgt\idrac) path.
Does your GFI Archiver resource usage SQL process ballon over 8GB? If so, the following procedure will reduce usage by about half and fix many performance issues.
I want to preface this article in saying that I would never use a software raid in a business environment. However, recently I tried the windows software raid on a home theater PC. We recently had a power issue and caused the RAID 1 to go into resyncing status. Since it was about 2 TB of data, the resync would take several days and be causing performance issues. I found I could not break the raid or remove the mirror.
To deploy excel macros on every excel file you open, you will need to create a personal file in your XLStart folder.